ENTER HERE - 3DPrint - Ultimate 3D Printing Giveaway!

**Eddie** · 07-26-2014, 10:18 AM

ABOUT

Welcome to the first "3DPrint Ultimate Giveaway"! 3DPrint.com and 3DPB.com have teamed with numerous 3D printing manufacturers and vendors to launch what we believe is the largest 3D printing related contest ever held. We would like to thank all of the participating vendors for taking part in this event. (note to non-participating vendors: If you are interested in partnering with us for future contests, please feel free to contact us).

RULES

- Contest will run from Today (September 2, 2014) until December 29th, 2014 at 12:00 AM ET.
- Random Contest Drawing will take place on January 13th, 2015, and winners will be announced on January 14, 2015 or soon thereafter. (note drawing date has changed due to CES 2015, which we will be attending)
- See complete rules and guidelines at: http://3dprintboard.com/showthread.p...-Contest-Rules - MUST READ AND AGREE TO THESE RULES & GUIDELINES IN ORDER TO PARTICIPATE IN THIS CONTEST

HOW TO ENTER - 5 Ways to Enter!

We understand that everyone does not have the same knowledge of 3D printing, thus we didn't think it was fair to create a contest that only those who have a deep knowledge of 3D design and 3D printing could enter. Instead, we decided to make this contest open to everyone (over the age of 18). There are several ways to earn entry "tickets" into this contest:

1) In order to enter the contest, earn 1 entry ticket, you MUST reply to this discussion thread, and answer the following 2 questions (answers must be at least 2 sentences in length each):
- What is the most interesting thing you have seen done with a 3D printer or 3D printing technology?
- If you could build your dream 3D printer, what would it include and what would it do? Let your imagination run wild!

2) To earn another 1 entry ticket per retweet, Follow us on Twitter, and retweet the following tweets on your twitter account. You must click the tweet URL listed below and then click the retweet button - We will be adding additional tweet URLs as we make them, so be sure to check back daily. Only 1 retweet per listed tweet below will be counted per entrant, and you may not retweet more than one of the below tweets per day.
Earn 1 Ticket for Retweeting the following tweets: https://twitter.com/3DPrintBoard/sta...97936437886976
Earn 1 Ticket for Retweeting the following tweets: https://twitter.com/3DPrintBoard/sta...53708280946688
Earn 1 Ticket for Retweeting the following tweets: https://twitter.com/3DPrintBoard/status/533010606811799552
More to come....

3) To earn another 1 entry ticket per Facebook share, Like us on Facebook and re-share the following Facebook posts. You must go to the links below and click on "share". We will be adding additional Facebook URLs as we make them, so be sure to check back daily. Only 1 re-share per link will be counted per entrant, and you may not re-share more than one of the below Facebook links per day.
Earn 1 Ticket for Re-sharing the following Facebook posts: https://www.facebook.com/3dprintcom/...24807561024121
Earn 1 Ticket for Re-sharing the following Facebook posts: https://www.facebook.com/3dprintcom/...30733247098219
Earn 1 Ticket for Re-sharing the following Facebook posts: https://www.facebook.com/3dprintcom/...50737018431175
More to come....

4) UP TO 10 ENTRIES FOR POSTING ON THIS FORUM: To reward both those forum members who have been active here and those that wish to become active members of this community, we will award an additional 1 entry ticket for every 10 posts you make or have made on this site (maximum of 100 posts / 10 entry tickets will be counted in total). All posts must be informative, well thought out discussion. No spam, or posts that appear to be made solely for the sake of earning additional tickets will be tolerated, and we reserve the right to disqualify and/or ban anyone who does break these rules. All posts must contribute to or start interesting conversations on this forum. (previous post counts will also count, so if you already have 50 posts on this forum and you have entered via option 1 above, you will earn an additional 5 tickets).

5) UP TO 33 ENTRIES FOR ANSWERING VENDOR QUESTIONS: To earn additional entries, you may click the "EARN ADDITIONAL ENTRY" link next to each prize vendor below and then answer the question that they have asked in their specific discussion thread (1 additional ticket will be given to you for each vendor's question that you answer):

PRIZE VENDORS
3DFilaPrint - Earn Additional Entry
3Doodler - Earn Additional Entry
3D Print - Earn Additional Entry
3DSupplyWorld - Earn Additional Entry
3D Thermoplastics - Earn Additional Entry
3dxtech - Earn Additional Entry
adafruit - Earn Additional Entry
BuildTak - Earn Additional Entry
Cokreeate - Earn Additional Entry
ColorFabb - Earn Additional Entry
E3D - Earn Additional Entry
FilamentDirect - Earn Additional Entry
FormFutura - Earn Additional Entry
German RepRap - Earn Additional Entry
Inside 3D Printing Conference - Earn Additional Entries
Insta3D - Earn Additional Entry
JustFilaments - Earn Additional Entry
KNKUSA - Earn Additional Entry
MakerGeeks - Earn Additional Entry
MatterHackers - Earn Additional Entry
New Matter - Earn Additional Entry
NinjaFlex - Earn Additional Entry
Pinshape - Earn Additional Entry
PlasticScribbler - Earn Additional Entry
Portabee3d - Earn Additional Entry
ProtoPlant - Earn Additional Entry
Recreus - Earn Additional Entry
ShapeHacker - Earn Additional Entry
Solidoodle - Earn Additional Entry
Toyze - Earn Additional Entry
Threeding - Earn Additional Entry
Zortrax - Earn Additional Entry

PRIZES

- GRAND PRIZE #1 - Zortrax M200 3D Printer - Prize Contributed by Zortrax

- GRAND PRIZE #2 - KLIC-N-PRINT 3D Printer - Prize Contributed by KNKUSA.com

- GRAND PRIZE #3 - NEO 3D Desktop Printer - Prize Contributed by German RepRap

GRAND PRIZE #4 - Mini Kossel Full DIY Kit (everything you need in one box) - Prize Contributed by MakerGeeks.com

- GRAND PRIZE #5 - A Solidoodle Press 3D Printer with 1 Spool of Filament - Prize Contributed by Solidoodle

- GRAND PRIZE #6 - A Portabee KIT 3D Printer with 1 Roll of Filament - Prize Contributed by Portabee3d.com

- GRAND PRIZE #7 - A MOD-t 3D Printer - Prize Contributed by New Matter

- A 3Doodler 3D Printing Pen with Changeable Nozzles and the DoodleStand - Prize Contributed by 3Doodler

- A “Super Compendium Sample Pack” - a box of 1.75mm or 3mm filaments in 10 metre samples in every one of our filament types, including those listed below - Prize Contributed by 3dfilaprint.com

Package Includes:

Biofila linen and silk
MadeSolid Pet + (choice of two colours)
Laywoo d3
LayBrick
Bendlay
Water soluble PVA
ABS & PLA Thermochange
ABS & PLA Ultra Violet sensitive
ABS Glow in the Dark
PLA Glow in the Dark
HIPS
Nylon 6
NinjaFlex White and Black (or choice of two colours)
Taulman Bridge
Nylon 618
Nylon 645
t-glase (choice of two colours)
1 x 200mm x 30 MetreRoll of Kapton Tape
1 x 50mm x 55 Metre 3M 2090 Roll of Blue Painters Tape
A 10 Metre sample of 3DXTech Nano and iON ABS.
4 x 10 Metre samples of the new Polymakr filament range.

- A “Super Compendium Sample Pack” - a box of 1.75mm or 3mm filaments in 10 metre samples in every one of our filament types, including those listed below - Prize Contributed by 3dfilaprint.com

Package Includes:

Biofila linen and silk
MadeSolid Pet + (choice of two colours)
Laywoo d3
LayBrick
Bendlay
Water soluble PVA
ABS & PLA Thermochange
ABS & PLA Ultra Violet sensitive
ABS Glow in the Dark
PLA Glow in the Dark
HIPS
Nylon 6
NinjaFlex White and Black (or choice of two colours)
Taulman Bridge
Nylon 618
Nylon 645
t-glase (choice of two colours)
1 x 200mm x 30 MetreRoll of Kapton Tape
1 x 50mm x 55 Metre 3M 2090 Roll of Blue Painters Tape
A 10 Metre sample of 3DXTech Nano and iON ABS.
4 x 10 Metre samples of the new Polymakr filament range.

- $100 Gift Certificate to the adafruit store - Prize Contributed by adafruit

- Your choice of either 0% commission for 1yr or a monetary prize of $100.00 - Prize Contributed by Threeding

- A $100 Gift Card for Pinshape - Prize Contributed by Pinshape.com

- $100 gift certificate good for any 3D printing filament from MatterHackers - Prize Contributed by Matterhackers.com

- A Customized Insta3D Figurine - Prize Contributed by Insta3D

- A 6 inch 3D Photo Extrusion (up to 2 objects in the photo) - Prize Contributed by Cokreeate

- A 10"x10" 10-pack of BuildTak Sheets - Prize Contributed by BuildTak.com

- A Proto-pasta Starter Kits - 50g each of all 3 exotic filaments, including Carbon Fiber Reinforced PLA - Prize Contributed by ProtoPlant, makers of Proto-pasta

- 1 kg role of choice (choose from Carbon Fiber, High Temp, or PC-ABS Alloy) - Prize Contributed by ProtoPlant, makers of Proto-pasta ($80 MSRP)

- E3D-v6 Hotend - Prize Contributed by E3D
e3d_125.jpg

- 1 Spool of NinjaFlex Filament - Fennerdrives (NinjaFlex)

- 1 Spool of NinjaFlex Filament - Fennerdrives (NinjaFlex)

- $50 Gift Certificate Good for any 3D printing Filament from MatterHackers - Prize Contributed by Matterhackers.com

- A $50 Gift Card for 3D Thermoplastics - Prize Contributed by 3D Thermoplastics

- $50 Gift Card for 3DXTech.com - Prize Contributed by 3DXTech.com

- A Custom 3D Print from the Toyze app - Prize Contributed by Toyze.com
(USA only - If you win this prize and are outside the US, we won't be able to provide it to you, sorry)

- Spool of WoodFill Filament - Prize Contributed by ColorFabb

- Spool of PLA/PHA Filament (color of choice) - Prize Contributed by ColorFabb

- Spool of GlowFill Filament - Prize Contributed by ColorFabb

- 500gr Spool of Green Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Fluor Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Orange Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Gray Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Gold Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Red Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Aquamarine Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Magenta Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Yellow Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Purple Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Blue Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Black Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of White Filaflex Filament - Prize Contributed by Recreus

- 500gr Spool of Transparent Filaflex Filament - Prize Contributed by Recreus

- A Spools of FormFutura's New EasyFil PLA (choice of 1.75 or 3mm) - Prize Contributed by FormFutura.com

- 2 Tickets to an upcoming show of your choice (dates may change - choose from Berlin, March 3-4, 2015, Sao Paulo, March 9-10, 2015, or New York, April 27-29 2015) - Prize Contributed by Inside 3D Printing Conference

- 1 kg Spool of ABS Filament - Prize Contributed by ShapeHacker.com

- Carbon Fiber PLA 1.75 or 3.00 - Prize Contributed by MakerGeeks.com

- A Spool of Filament from FilamentDirect.com - Prize Contributed by FilamentDirect
filamentdirect_125.png
- A Spool of Filament from FilamentDirect.com - Prize Contributed by FilamentDirect
filamentdirect_125.png
- A Spool of Filament from FilamentDirect.com - Prize Contributed by FilamentDirect
filamentdirect_125.png

- PLA or ABS (1.75mm or 3.00mm) filaments (winners could choose what they want front the store) - Prize Contributed by MakerGeeks.com

- PLA or ABS (1.75mm or 3.00mm) filaments (winners could choose what they want front the store) - Prize Contributed by MakerGeeks.com

- Custom Print : A custom print of 4" x 4" item of your choice. Black, white, Thermochrome, or yellow PLA - Prize Contributed by 3DSupplyWorld

- 1 Spool of Filament, your choice. Just specify diameter! - Prize Contributed by 3DSupplyWorld

- $25 Gift Card - Prize Contributed by 3DSupplyWorld

- Coupon good for 1 Roll of Filament from JustFilaments - Prize Contributed by Justfilaments.com

- Keep Calm Geek ON “MakerGeeks.com” logo shirts (size up to the winners) - - Prize Contributed by MakerGeeks.com

- A MatterHackers T-Shirt - Prize Contributed by Matterhackers.com

- A PlasticScribbler T-Shirt - Prize Contributed by PlasticScribbler
plasticscribbler_125.png

- A PlasticScribbler T-Shirt - Prize Contributed by PlasticScribbler
plasticscribbler_125.png

- A PlasticScribbler T-Shirt - Prize Contributed by PlasticScribbler
plasticscribbler_125.png

- A PlasticScribbler T-Shirt - Prize Contributed by PlasticScribbler
plasticscribbler_125.png

- A PlasticScribbler T-Shirt - Prize Contributed by PlasticScribbler
plasticscribbler_125.png

- $10 Amazon Gift Card - Prize Contributed by 3DPrint.com

- $10 Amazon Gift Card - Prize Contributed by 3DPrint.com

Thread: ENTER HERE - 3DPrint - Ultimate 3D Printing Giveaway!

Thread Tools

Display

Threaded View

ENTER HERE - 3DPrint - Ultimate 3D Printing Giveaway!

Posting Permissions

Ender 3v2 poor printing quality

Carbon Fiber Filament...

Looking to buy a printer

Retraction speed

Can't print my model (non manifold...

Main Coon Kittens

Air compressor keeps running while...

Have question about login