Results 3,521 to 3,530 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
10-08-2016, 06:37 PM #3521
- Join Date
- Sep 2016
- Posts
- 80
-
10-08-2016, 09:56 PM #3522
- Join Date
- Sep 2016
- Posts
- 80
QIDI is telling me I need to take off the nozzle and replace the plastic tube. Which is fine...but I don't know how to get the carriage loose so that I can get the entire assembly off the carriage or rails (depending on what I need to do).
-
10-09-2016, 12:30 AM #3523
- Join Date
- Feb 2016
- Posts
- 360
To take the extruder carriage off the trolly there are 2 screws on the underside....but ya dont need to do that in order to get the PTFE tube out.
Use the pre-heat function on the machine to heat the nozzle, and wait till it hits the 230c. Use wrench to undo the nozzle (make sure you hold the hot-block, above the nozzle, with some pliers so it does not twist). When the nozzle comes down the PTFE tube should come with it, if not gently grip the PTFE tube with pliers and pull it down.
-
10-09-2016, 12:34 AM #3524
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Here are some vids that may help out:
https://www.youtube.com/watch?v=0eR23r0zgkU
https://www.youtube.com/watch?v=bKbG2Smu6jY
-
10-09-2016, 03:26 AM #3525
- Join Date
- Mar 2016
- Posts
- 29
ok so i sed i was going to post some pics of the 10mm rod upgrade days ago but i just haven't gotten around to is so here they are
[URL=http://s76.photobucket.com/user/wazza35/media/Photo%208-10-16%208%2007%2058%20pm_zpspjex2ebz.jpg.html][/URL
also has any one thought about moving the position of the power switch.
i am thinking of doing this as its a pain to get to the back of my printer to switch it on.
-
10-09-2016, 04:27 AM #3526Editor in Chief
Bitsonline
Tips Appreciated But Not Expected
BTC: 16wxHvKd3oU6SVjv6FrenqhkvRmc8t7sPy
DASH: XqyaWxH896j9YeV1M35Gzb5gmRPmPbNDGq
-
10-09-2016, 07:45 AM #3527
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
-
10-09-2016, 11:51 AM #3528
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
I forget and can't find any posts but has anyone here used Hatchbox wood filament? Wondering on basic settings.
-
10-09-2016, 12:04 PM #3529
- Join Date
- Sep 2016
- Posts
- 80
-
10-09-2016, 06:13 PM #3530
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners