I ran the extrusion multiplier to .95 and it is better. I will try 220 and see how that does. I was at 230.

What are you using for retract on the ABS?


Quote Originally Posted by Talon 3D View Post
I slow down the extrusion rate on the Hatchbox ABS as it. I print it at 220c 110c bed temp.
I didn't change any profiles.
I've been using S3D for a couple weeks now and it allows better control.
My Soultech ABS I run 230c and 110c temps at 1.72 for filament dimensions.