Results 1 to 10 of 396
Threaded View
-
09-23-2016, 09:51 PM #10
Actually, mintemp would be an open connection. The thermistor resistances go up with colder temperatures. So, assuming no wiring changes were made, maybe there's a configuration problem with the input that is being sampled for that temperature.
EDIT: Here's a resistance vs. temperature plot for the typical EPCOS thermistor...
Last edited by printbus; 09-24-2016 at 10:43 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion