Yes, I used the M280 commands to determine to correct angles. Uploaded the changes and then used the m401 and m402 commands to check. I even did a g28 and g29 to confirm. All work well.
The next time I fired up the machine the servo angles are wonky.
Originally Posted by kd7eir
Did you compile and uploaded the firmware after changing the servo endpoints?
Try testing with this, making sure the probe ends up where you expect
M401 - deploys the probe
M402 - retracts the probe
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help