Results 1 to 10 of 396
Threaded View
-
09-18-2016, 02:01 PM #11
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
Be careful with the Z probe offset. I have my capacitive proximity probe above the nozzle, so I thought the offset would be a positive number, for above the nozzle. It's not. It triggers below the nozzle, so my offset has to be negative.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)