Results 1 to 10 of 73
Thread: Diy it?
Threaded View
-
06-08-2016, 02:30 AM #29
- Join Date
- Oct 2013
- Location
- nsw australia
- Posts
- 81
@thej, it should work assuming you have a sheet at approx the right thickness (I think I had measured it at approx 3mm thick), and the gasses released are part of the issue with the FFF printers and abs also
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion