Results 21 to 26 of 26
Thread: Help printing ABS
-
04-07-2016, 12:58 PM #21
- Join Date
- Apr 2016
- Posts
- 6
Unless i missed it the one thing no one has said is, Do not have a fan blowing on the part when printing ABS!
what % infill are you using? the bubbling could be from your infill when it connects to the shell. also check the infill over lap.
-
04-08-2016, 09:08 AM #22
Why? I use a print fan after the 5th layer. I find that it improves the surface finish. (FFCP Hatchbox 220c/100-90c 60mms)
-
04-08-2016, 09:13 AM #23
- Join Date
- Apr 2016
- Posts
- 6
When I turned off the fan the warping stopped and delaminating went away.
-
04-08-2016, 12:11 PM #24
Thanks for the reply. That's the one thing about 3D printing, (like medical stuff) what works for some may not work for others.
-
04-08-2016, 12:21 PM #25
I used A fan with abs as it massively improved the overall print quality.
I suspect the most important thing is to have an enclosed print bed.
-
04-08-2016, 12:51 PM #26
On ABS, we always use a fan at 50% after layer 5; never before layer 5. We use this recipe on all of our production prints.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery