Results 1 to 2 of 2
-
07-06-2015, 09:25 AM #1
- Join Date
- Jul 2015
- Posts
- 1
Rep. 2X Fan has stopped running. Help please.
The extruder fan on my 2X has ceased running. I have yet to run a continuity test on it, but when swapping fan connections nothing changes. Also, the other fan now runs constantly regardless of the temperature. I have checked the settings (fan cut off/on is at 50C) as well as reinstall new firmware. I've heard rumblings that this could be assoc. with the motherboard. Can anyone shed any light on the issue or point me towards some troubleshooting?
-
07-06-2015, 10:56 AM #2
- Join Date
- Jul 2015
- Posts
- 41
It sounds like your MightyBoard has voltage issues. If you're still covered under warranty we would be happy to swap this out for you. In any case I recommend you open a case at support.makerbot.com.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery