Results 1 to 10 of 476
Thread: Itty Bitty Double Extruder
Threaded View
-
01-19-2015, 10:46 AM #11
- Join Date
- Nov 2014
- Location
- FL
- Posts
- 9
Thanks Roxy. Also, when powering the servo from the AUX-2 pins, do I need the signal wire on D40 and the pos/neg wires plugged in on the two top pins? The AUX-2 schematics look a bit more convoluted when determining pins than the rest of the board.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help