Results 1 to 10 of 396
Threaded View
-
09-25-2014, 10:55 PM #11
Did some basic testing and it looks like it works. I ran through some combinations of arguments from the full blown to the original (see below) and didn't find any problems. Then I started a print and it setup fine and is working away.
E.g. G29 V4 T n3 L95 F95 R105 B105
Code:Send: G28 X0 Y0 Z0 Recv: ok Send: G29 V4 T n3 L95 F95 R105 B105 Recv: Roxy's Enhanced G29 Auto_Bed_Leveling Code V1.01: Recv: Bed x: 95.00 y: 95.00 z: 7.95 Recv: Bed x: 100.00 y: 95.00 z: 7.90 Recv: Bed x: 105.00 y: 95.00 z: 7.92 Recv: Bed x: 95.00 y: 100.00 z: 7.84 Recv: Bed x: 100.00 y: 100.00 z: 7.86 Recv: Bed x: 105.00 y: 100.00 z: 7.93 Recv: Bed x: 95.00 y: 105.00 z: 7.89 Recv: Bed x: 100.00 y: 105.00 z: 7.88 Recv: Bed x: 105.00 y: 105.00 z: 7.89 Recv: Eqn coefficients: a: 0.00 b: -0.00 d: 8.09 Recv: Mean of sampled points: 7.895500 Recv: Recv: Bed Height Topography: Recv: --0.00600 --0.01700 --0.00500 Recv: --0.05700 --0.03425 +0.03325 Recv: +0.05875 +0.00400 +0.02325 Recv: Recv: planeNormal x: -0.00 y: 0.00 z: 1.00 Recv: Recv: Recv: Bed Level Correction Matrix: Recv: 0.999998 0.000000 0.001858 Recv: 0.000007 0.999993 -0.003800 Recv: -0.001858 0.003800 0.999991 Recv: ok Recv: echo:endstops hit: Z:7.89
Code:Send: G29 V4 T n2 Recv: Roxy's Enhanced G29 Auto_Bed_Leveling Code V1.01: Recv: Bed x: 75.00 y: 50.00 z: 8.01 Recv: Bed x: 175.00 y: 50.00 z: 8.19 Recv: Bed x: 75.00 y: 175.00 z: 7.80 Recv: Bed x: 175.00 y: 175.00 z: 7.96 Recv: Eqn coefficients: a: 0.00 b: -0.00 d: 7.97 Recv: Mean of sampled points: 7.986500 Recv: Recv: Bed Height Topography: Recv: --0.19100 --0.03075 Recv: +0.01850 +0.20325 Recv: Recv: planeNormal x: -0.00 y: 0.00 z: 1.00 Recv: Recv: Recv: Bed Level Correction Matrix: Recv: 0.999999 0.000000 0.001725 Recv: 0.000003 0.999998 -0.001774 Recv: -0.001725 0.001774 0.999997 Recv: ok Recv: echo:endstops hit: Z:7.96
Last edited by dacb; 09-25-2014 at 10:58 PM. Reason: Sentences are good, use them.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help