Results 1 to 10 of 27
Threaded View
-
09-16-2014, 11:10 PM #9
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
so a bit less time at the moment but I more and more on a good feeling to print on the weekend the first time
(if anyone has a great idea what to print first let me know)
at the moment still need to calibrate and also would like to readjust the Pololus again a bit, reason is simple Z and Y feels good after a wile moving around Motor still cold but X get already temperature so I´ll try to find a level without missing steps but cold as possible motors.
Finaly I´ll share "my" adjsutments (at the moment between 250 and 350mV)
best regards
Thomas
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion