New to 3D Printing and need some help.

[BLKKROW]

First, in the preferences, turn on Expert mode. File / Preferences / Expert_Mode

Then, in Print_Settings / Speed / Bridges set to 1/5 of your normal speed. And probably you want to set Bridge Acceleration (at the bottom of that same page) pretty low too.

Lastly, and most importantly, in Print_Settings / Advanced / Bridge_Flow_Rate down at 90% or maybe even less.

Well that may be an issue as I cannot use the Slic3r program independent of repg. I can only go into repg and edit the slicing profile for slic3r. I am at work currently and cannot provide more details, I will try to use slic3r tonight and import the gcode with repg and see if my printer will work. Last time I tried that the extruder would not move and sit in one spot trying to print.

Roxy, may I ask what version of slic3r you are using? I tried using the latest 1.1.6 with repg and it did not work. Maybe I should try a different version?