Results 1 to 3 of 3
Threaded View
-
04-14-2014, 06:47 PM #2
- Join Date
- Nov 2013
- Posts
- 42
My experience has been the other way around. I use proprietary (Up) and Repraps and the comments about the Up by people who have never used it are quite hostile and dismissive. There's a certain gap that occurs when one persons priority is printing something nice, and another's is doing that but only using technology that is compatible with a belief system.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion