Results 1 to 4 of 4
Threaded View
-
04-09-2018, 07:25 PM #4
Today I went into the Repetier Online Configuration Tool to grab the necessary values to change in EEPROM when I noticed I was using the tool version 0.91 but 0.92 was installed on the machine already. I switched the online tool to 0.92 and then downloaded my firnware package and it compiled and uploaded successfully!
Thanks for the help!
Thanks,
Joe
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help