Heaven help me - I've just bought a delta kit :-)

[curious aardvark]

0.4mm layer height. My new favourite layer height :-)
Runs nicely at 210c and 100mm/s, ideal for my 0.5mm nozzle.
Makes big things fast and as long as there's no complex over or underhangs - looks pretty good.
Currently using it for my clay glande moulds.
78 cubic cm in under 3 hours. Dimensions are bang on too :-)

The interesting thing about these moulds is that the two halves slice completely differently.
The tongue half is always super smooth on the inside, while the groove always has issues - if you print them seperately.
If I print both together, both are equally smooth, and no stringing either.

3sizes1_640x330.jpg

The numbers refer to the length and diameter of clay cling bullet they make. The 70x46 could probably be used for hunting elephants. It's a big glande.