Results 1 to 10 of 74
Threaded View
-
09-15-2017, 12:10 PM #11
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Knp3d is a dual extruder machine. Down side is it uses 8mm Z-Axis rods which can make the platform a bit loose. It does not have a front door, so a hood and front door w/b needed for use w/ ABS.
QiDi X-One2 is a single extruder machine. 10mm Z-Axis rods, Not sure if it has a hood or not.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion