Results 1 to 10 of 60
Thread: Choosing my first Delta Printer
Threaded View
-
09-07-2017, 08:57 AM #15
- Join Date
- Jul 2017
- Posts
- 100
yeah I'm an idiot, I just learned that last night xD. Okay so right now, it seems like it's a gcode thing. I only do a G28 follow by a G33 P7 or G29 then M500, but apparently because of the slicers (cura in this case), which always does a G28, it turns off the bed leveling correction even if I do M500 ,So my Gcode in Cura should be G28, then followed by either G29 or G33 P7, M500 and then M420 S1?. Is that correct?
EDIT: apparently M420 S1 is not for G33, but G29, so i guess I'll try that later tonight.Last edited by iamthebest22; 09-07-2017 at 09:15 AM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help