Results 41 to 50 of 71
Thread: 3D Printed 3D Printer
-
08-07-2017, 05:34 AM #41
actually 20 american mpg is pretty good - you guys have such little gallons that it always sounds awful.
so 24mpg in real gallons.
Not exactly stunning, but for a totally impractical car - not bad :-)
Printer is looking amazing.
what board and control panel/screen are you going to use ?
-
08-07-2017, 11:19 AM #42
I upgraded the control board and screen on my GEEETech i3 just for a touchscreen. So those parts will be going in here. This printer will get this gt2560 board..
And it will get the reprap discount 12864 screen that is in my hand in the below pic..
haven't figured out where and how I want to mount them just yet. but we will get there soon.
-
08-07-2017, 05:47 PM #43
-
08-07-2017, 09:13 PM #44
-
08-07-2017, 11:03 PM #45
Here is all the printed parts assembled. I have never posted up anything on thingiverse but I feel I should share the extra files I made to complete this printer..
all axes move free and smooth. When the x carriage is all the way up on the z there is sway fore and aft of the frame that I know will show in print quality so I will design the power supply mount and mainboard mount to also be supports for the frame. Still a little ways to go.
-
08-13-2017, 09:40 PM #46
-
08-14-2017, 06:59 AM #47
looking good :-)
just out of curiosity (why i do most things)
what print settings have you been using for the printer parts ?
-
08-14-2017, 11:23 AM #48
0.2mm layer height. both 0.3mm and 0.4mm nozzle diameters(geeetech is 0.3, printalicious and black widow are 0.4mm) bed temp is at 50c and I have been keeping the hotend at 210c to ensure good layer adhesion. I have good layer fans that do a good job of cooling the filament so I can get away with using the higher temps without degradation of my print quality.
-
08-14-2017, 11:31 AM #49
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Sorry if I missed this previously, PLA?
-
08-14-2017, 06:44 PM #50
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery