Results 1 to 7 of 7
Hybrid View
-
06-12-2017, 02:35 PM #1
If you bring up the UBL Bed Leveling System, the accuracy of the Z-Probe doesn't really matter. If the probe is super accurate, it save 10 or 15 minutes of setup time. But even with a horrible Z-Probe (or no Z-Probe) you can generate a mesh and fine tune it in 30 or 40 minutes. And from then on... Your "Good to Go".
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion