Results 1 to 7 of 7
Threaded View
-
04-08-2017, 11:42 AM #4
yep. is it larger prints that are not sticking ?
Calibration can be a real bastard. I always heat both the bed and the nozzle - some tell you just to heat the bed.
each to their own.
I like to heat both and use 90gsm paper quite tight between the nozzle and bed.
All i can say is it works for me.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion