Close



Page 400 of 411 FirstFirst ... 300350390398399400401402410 ... LastLast
Results 3,991 to 4,000 of 4110
  1. #3991
    Sounds like some sweet upgrades. I've been considering a fanless power supply.

  2. #3992
    Here's a new one for me I'm hoping someone can help with. The printer stopped responding in the x-axis mid-print, leaving a solid extruded line in the y-axis and no longer responding to machine jog controls. The stepper motor was cool and the belt/gears/connections looked fine.

    I restarted the machine and the x-axis was again responsive. Restarted the print and after about an hour of normal operation the machine started making a clunking noise in response to x-axis commands. It was still trying to print, but was shaking violently. I stopped the print and tried machine jog controls, it responds erratically to x-axis input with a grinding jerky motion.

    Any ideas what the problem could be? Maybe a stepper motor or driver? I'm wagering someone's seen this exact same thing .

    A few statistics on the all original parts: 1608 hours, 3284 meters of filament

  3. #3993
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Stepper cable is bad (most likely). If you don't have a spare then you can swap it with the y or one of the others to test.

  4. #3994
    That seems to have been the culprit, although it appeared fine upon inspection.

    Thanks very much whirlybird! Any tips on avoiding re-replacement? Maybe it's time to breakdown and print the flexible cable tray and reroute?

  5. #3995
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    I undid the cable from the last bolt on the top of the frame to let it hang a bit. Never got around to the cable chain.

  6. #3996
    Super Moderator
    Join Date
    Apr 2014
    Location
    KS
    Posts
    907
    Add jfkansas on Thingiverse
    3 years on original wiring like this. The wires are taped to the side panel.

    17475135_10208341250121078_1426949295_o.jpg

  7. #3997
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Wires look familiar there JF!!

  8. #3998
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Owl in Hatchbox wood PLA on the Tech-1. I think I have the settings pretty good. A little stringing at the top so not sure what exactly to adjust but it is minor!



    [IMG][/IMG]

  9. #3999
    Looking good! Can you share your basic profile settings?

    I've been itching to try printing some wood like stuff. Have you tried any others and does it require changing nozzles or anything?

  10. #4000
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    S3d basic PLA for the Tech-1. Slower speed but still playing with that. Temp 195-205. .2 layer, 4mm and 1200mm/min retraction.

Page 400 of 411 FirstFirst ... 300350390398399400401402410 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •