Results 1 to 10 of 13
Threaded View
-
12-26-2016, 12:30 PM #11
- Join Date
- Apr 2016
- Posts
- 120
Try increasing the bed - extruder gap a little. It looks like the slightly thicker first layer is catching on the extruder. Half a turn might do it.
Do you need to print a raft? I find with Buildtak I never need to. It keeps the print attached and with no warping.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion