Results 371 to 380 of 396
-
11-29-2016, 09:35 PM #371
- Join Date
- Jun 2015
- Location
- Overland Park,Kansas,Usa
- Posts
- 9
I am trying to get my 8" i3v going again after several months of neglect. I have the hardware for ABL.. what is the address of the latest/best marlin RAMPS build?
-
12-04-2016, 09:41 AM #372
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
https://github.com/MarlinFirmware/Marlin is always the "right" way in. RC7 appears to be the latest.
Bob
-
12-04-2016, 02:00 PM #373
Actually... RC-7 is a very stable point in time. But RCBugFix is always more up to date than the frozen RC-# Unless you have a real reason for not using RCBugFix, that is usually the best choice.
-
12-04-2016, 07:50 PM #374
- Join Date
- Jun 2015
- Location
- Overland Park,Kansas,Usa
- Posts
- 9
Is there a configuation.h that you have built? After I uploaded rc7, my LCD is blank... I looked over the configuation.h, but nothing jumped out at me.
-
12-04-2016, 07:51 PM #375
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
-
12-16-2016, 09:25 PM #376
- Join Date
- Jul 2014
- Posts
- 305
-
12-16-2016, 11:08 PM #377
For sure... RC-8 is much better than RC-7. But you really should be using RCBugFix. Right now, RCBugFix is very close to RC-8. But over time... RCBugFix will be much better than RC-8.
-
12-17-2016, 07:05 AM #378
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
What's the status of mesh bed leveling in RC-8 / RCBugFix?
Bob
-
12-17-2016, 09:23 AM #379
It works. But the RC-8 / RCBugFix version does not allow you to save the mesh. The UBL Branch lets you save the mesh and it also provides very nice Mesh Validation Pattern and Editing commands for the Mesh.
-
12-17-2016, 09:52 AM #380
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
It's the mesh pattern validation stuff that I'm waiting for .... trust but verify ... I've dropped the median filter back to 3 samples on the BLTouch and need to check things from time to time.
Bob
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery