Results 1 to 5 of 5
Thread: Filament getting stuck in head
Threaded View
-
10-24-2016, 05:51 AM #4
one of the things to do is get the retraction speed as fast as the machine and filament can handle.
The upper end is generally between 40-60mm/s.
If you start using flexible filaments, you want as little retraction as possible and a lot slower, or it can buckle in the extruder. For most rigid filaments this is not an issue.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help