Itty Bitty Double Extruder

[clough42]

At long last: The hardware kits are here!

http://www.ebay.com/itm/Itty-Bitty-D...-/161542799817

This kit includes all of the miscellaneous hardware required to assemble the Itty Bitty Double Extruder:

• GT2 20-tooth Pulleys with set screws (2)
• GT2 200mm Belts (2)
• 688ZZ 8x16x5mm Bearings (6)
• Extension springs (2)
• Fiberglass/Polyimide insulator
• M2.5x10 socket head cap screws (2)
• M4x.7 hex nuts (2)
• M4x20 button head cap screws (2)
• M3 flat washers (6)
• M3x.5 hex nuts (11)
• M3x25 socket head cap screws (3)
• M3x16 button head socket cap screws (10)
• M3x12 flat head socket cap screws (10)
• M3x8 socket head cap screws (6)
• M3x6 button head socket cap screws (2)

You will also need the printed parts, motors, hobbed bolts, hot ends and fans. The Hexagon hot ends now come with 25mm and 40mm fans that will work. If you order your hot ends from Colin at MakerFarm, be sure to let him know you need the 25mm fans.