Results 1 to 10 of 396
Threaded View
-
12-14-2014, 02:41 PM #11
Do you understand what was happening? If you really need the EEPROM settings enabled, you can turn them on. But you have to save correct values to the EEPROM using M502 and M500. The reason is the settings in your Configuration.h file will not be used. Instead, the Marlin firmware will see values stored in the EEPROM, and use those instead.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help