Results 1 to 10 of 476
Thread: Itty Bitty Double Extruder
Threaded View
-
11-29-2014, 04:38 PM #1
Itty Bitty Double Extruder
Introducing the Itty Bitty Double Extruder:
IBDE-RightFront.jpg
This is a completely new dual extruder system:
- Dual Hexagon hot ends on 20mm centers
- Quiet, zero-backlash belt drive
- NEMA 14 motors
- Integrated hot end cooling
- Integrated print cooling
- Integrated servo Z-probe for auto-bed-leveling
- Easy-to-install cam-lock idler bearing shafts
- 2g lighter and 2mm narrower than the standard MakerFarm hinged single extruder
- Includes all parts necessary to mount on MakerFarm Prusa i3v printers
Please use this thread for questions and discussion.
*** A hardware kit is now available! ***
Get it here
Links:
- Printable parts: http://clough42.com/go/itty-bitty-double-extruder
- Assembly Instructions: http://clough42.com/go/itty-bitty-do...ruder-assembly
- Calibration Instructions: http://clough42.com/go/double-extruder-calibration
- Hardware kit: http://clough42.com/product/itty-bit...-hardware-kit/
- HXT900 Servo: http://clough42.com/product/hxt900-servo/
- Firmware: https://github.com/clough42/Marlin
- Forked from beckdac/Marlin (Roxy's enhanced G29)
- Branches:
- Marlin_v1: main from upstream
- hardware/i3v_double_bitty: MakerFarm Prusa i3v (8") with auto-leveling
- Configuration.h - https://raw.githubusercontent.com/cl...onfiguration.h
- Configuration_adv.h - https://raw.githubusercontent.com/cl...guration_adv.h
Last edited by clough42; 04-20-2015 at 12:13 AM. Reason: Update summary information
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)