Results 1 to 5 of 5
Threaded View
-
01-06-2017, 03:03 PM #1
- Join Date
- Jan 2016
- Posts
- 326
Flashforge Creator Pro driver for Windows 7 Pro?
The woodworking shop at the program for mentally-handicapped people where I work got a new Flashforge Creator Pro 3D printer (the new one with one-piece top cover). I tried to install the driver for the printer on an HP Z220 computer running Windows 7 Pro but I got a yellow "!" in the driver under device manager. How can I fix this problem? I tried to level the build platform using the LCD control panel but I couldn't do it. How can I do this? I tried to level the build platform using a file from the SD card but after adjusting the leveling screws so that the paper can be moved with a little drag and the nozzles move to the center of the build platform, the paper can be moved without any drag. How can I fix this? There is blue tape on the build platform and the printed job didn't stick to the tape. I couldn't remove the spool from the holder to see if the filament is ABS or PLA. The printer came with Flashprint and ReplicatorG. Which program to use? I could use Simplify3D but I already have it at home for my own PowerSpec Ultra printer. Are there any differences between Flashforge Creator Pro and PowerSpec 3D Pro 2?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help