Results 1 to 10 of 476
Thread: Itty Bitty Double Extruder
Threaded View
-
05-17-2015, 12:16 PM #18
- Join Date
- Dec 2014
- Posts
- 49
Using Clough's firmware, adjusted for my 10" bed, calibrated nicely. However, my prints aren't printing in the center of the bed...they seem to be off by about 20mm on the Y axis, and 30mm on the X axis. Any ideas?
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials