Results 1 to 10 of 38
Thread: Surface Smoothness
Hybrid View
-
06-13-2014, 08:16 PM #1
Hi all. I'm curious about kudo3d working for action figures and statuettes prodution. I'm planning work with resin casting to make pieces with 20cm to 30cm. I think printing some separate part to further make some post prodution (sanding and polish) and the final assemble to make mold casting.
My question are:
Will I have a hard post prodution of parts printed?
Could I 3D printing that parts with 26 microns always?
Will Kudo3d works fine to my purpose?
ThanksLast edited by Valter; 06-13-2014 at 08:18 PM.
-
06-14-2014, 01:37 AM #2
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Hi Valter - thanks for your interest. The build volume is 70mm x 40mm x 240mm at 37 micron resolution. The build volume is 192mm x 108mm x 240mm at 100 micron resolution. 26 microns would only be possible with the lens modification (users will have to do the modification themselves). Thanks!
-
06-15-2014, 12:36 AM #3
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials