Results 1 to 10 of 84
Hybrid View
-
01-09-2016, 05:44 PM #1
-
01-10-2016, 08:03 AM #2
What slicer are you using? For those who use the 2015 FFCP with S3D it's almost useless for file transfer, nothing new very common problem.
Now if you are talking about printing from USB, using a computer that's a different animal all together. As I said before, I don't print via USB. I like many others don't want to have a computer connected to and running all the time to print.
What do you mean by ".... file types that can be read directly from a SD is very limited"
The solution I proposed above has no limitation that I've found (except file names over 15 character limit), and solves a specific problem for me.
-
01-10-2016, 08:26 AM #3
Yes we have a computer, that I assembled, dedicated just for the printer,.
always connected thru USB. Very easy that way !
We use Makerbot-2.4 slicer.
Our CTC printer will only read .x3g files from a SD card, not .stl files,
and I've read that other printer makes are limited that way also.Last edited by EagleSeven; 01-10-2016 at 11:09 AM.
-
01-10-2016, 08:45 AM #4
Ok so that make MUCH more sense. We are not talking about that same things here.
The "file type" is not a limitation in the method used for printing, it's a limitation of the printers firmware, actually I wouldn't even call it a limitation, its more like a specification, which is a non issue because S3D converts to .x3g automagically...
-
06-09-2016, 07:08 AM #5
- Join Date
- Jul 2014
- Location
- UK
- Posts
- 124
I have an 8GB W-02 card.
Does this only work with a W-03 card ?
-
06-09-2016, 08:52 AM #6
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials