Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 58

Hybrid View

  1. 10-02-2015, 02:25 PM #1
    Alibert
    Alibert is offline
    Engineer-in-Training
    Join Date
    Sep 2014
    Location
    Brummen, Netherlands
    Posts
    265
    It looks like it is over-extruding a lot.

    Your printer seems to be a replicator-dual clone and should print very well (my three clones print excellently).

    What settings did you use in S3D? If you select 'flashforge dual' as the basic printer type and work from there it should give good results. Also, measure your filament with a digital caliper. Some filaments are way off. Playing with the filament diameter can help when slicing.
    Reply With Quote Reply With Quote
  2. 10-03-2015, 02:12 AM #2
    anthony27
    anthony27 is offline
    Technician
    Join Date
    Sep 2015
    Location
    South Australia
    Posts
    89
    Quote Originally Posted by Alibert View Post
    It looks like it is over-extruding a lot.

    Your printer seems to be a replicator-dual clone and should print very well (my three clones print excellently).

    What settings did you use in S3D? If you select 'flashforge dual' as the basic printer type and work from there it should give good results. Also, measure your filament with a digital caliper. Some filaments are way off. Playing with the filament diameter can help when slicing.
    Is there some info, on how to calibrate the creator pro dual?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules