Results 1 to 3 of 3
Threaded View
-
10-15-2016, 08:10 PM #3
- Join Date
- Sep 2016
- Posts
- 2
Hey, thanks for the reply. I do believe this was part of the problem. I'm slowly addressing each problem printer by printer and I've fixed the majority of them.
A couple of the nozzles were in dire need of being replaced. So I replaced those and those extruders are working pretty well now. I also used new filament, which helped. The filament I was using before was a few months old, so I can see why it may be giving problems.
Thanks again!
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion