Results 1 to 9 of 9
Thread: UP makes Great Printers
Threaded View
-
10-04-2016, 02:39 AM #9
I have an Up plus 2 and it printed for one year and a half without problems. Then the CPU broke and the price that Tiertime gave me for the CPU was $400. I searched on forums and found a cheaper, compatible CPU and I repaired it with only $80.
Now, we use it in the office with Simplify 3D, but the prints are still good quality, because the machine is built very, very well.
Even if the original firmware is missing.
Printare 3D Bucuresti
Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion