Results 1 to 10 of 20
Thread: Why does my printer suck.
Threaded View
-
09-15-2016, 06:32 PM #9
Check that the bottoms of the Z screws are flat and file them flat if they're not. The axes are always a little misaligned, and when the non-flat cut surface rotates with the motor shaft, it rises and falls, causing Z banding. If you file the screw ends flat and drop a BB in each tube or coupler, this goes away completely.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help