Quote Originally Posted by jfkansas View Post
ABS and hairspray has never worked for me especially on large flat bottom parts. Small parts its ok. I've tried all the tricks, several coats, let it build up etc.

Lately I've been scraping bed clean with a single edge razor window scraper. Then wiping the glass with AquaNet on a paper towel. Then heating bed to 70c and applying a thin coat of abs slurry. I have some white and clear mixed up and I keep in small mason jars. Also have some colors mixed up if needed. Once the bed fully cools the part generally just lays there un stuck to the glass and you just lift it off.

How do you usually apply the ABS slurry? I've been wiping it on with a paper towel.