Originally Posted by jfkansas That is for marlin software or repitier I think. 100mm of filament will extruded way more than 100 mm of filament. Best filament calibration is a 20x20x10 100% infill cube. Follow sailfish recommendations for sailfish software. In S3d a good starting point for extrusion volume is 90%. Ok, thanks. You may have told me that stepper calibration or this test is not needed on the QIDI/Sailfish.
View Tag Cloud
Forum Rules
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help