Results 1 to 10 of 42
Thread: Pegasus 12" Build Notes
Hybrid View
-
08-27-2016, 03:56 PM #1
- Join Date
- Jul 2016
- Location
- Indiana
- Posts
- 8
If you could post a few pics of how your wiring was routed that would be helpful. Also any links to printed cable shields and nylon jackets.
MODERATOR NOTE: Post is late to appear due to delay in obtaining moderator approvalLast edited by printbus; 09-16-2016 at 10:40 AM.
-
09-21-2016, 05:05 PM #2
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
The printer has now been re-wired with a dual supply. I'm not real sure that the wire routing in it's current configuration is going to be a lot of help. Are you running a dual extruder and after it's wiring?
The cable jacket I used the most of was:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
BobLast edited by uncle_bob; 09-21-2016 at 05:14 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion