Results 1 to 10 of 18
Threaded View
-
08-24-2016, 12:50 PM #18
- Join Date
- Jul 2016
- Posts
- 18
So i have been printing for a while now using a PTFE lined barrel (Friends E3D V6) and no more extrusion problems! (Well i do have one "under extrusion" problem. But i do not believe this is related to the hotend.)
I suspect the pop might have been some chloroform residue in the nozzle and/or some trapped air in the melt zone. I have cleaned my nozzles the day before. The extruded plastic is generally a smooth line after the hotend is primed at the start of the print.
I do have a different problem now which i will describe in a different topic as i believe this is unrelated.
Thank you guys!
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion