Results 1 to 3 of 3
Thread: 3DMonstr enclosure
-
03-15-2014, 07:44 PM #1
- Join Date
- Mar 2014
- Posts
- 3
3DMonstr enclosure
I realize building a 3D printer with an enclosure would be risky considering the Stratasys patents, but I wonder if provisions could be designed in the 3DMonstr electronics to accommodate some generic home built "extensions"...
Something like adding an extra thermocouple input along with a digital output that could be used to activate an external heater...
Thanks!
-
03-16-2014, 03:09 PM #2
Hi, Boto,
I want to make sure that we don't do anything that SSYS can point to and claim that we're encouraging others to violate their patents. So I can't include anything that is intended directly and solely to that purpose.
OTOH, I think that if you decide to use our products in a way that they are not intended to be used, and thereby end up violating their patents, there's nothing I can do about it. For example, we've had customers from hot/humid climates (central America and Middle East) as us about extra cooling for the electronics. So we're considering creating and selling an add-on kit for that. You could probably Frankenstein something usable out of that.
Thank you.
Ben.
-
04-06-2015, 11:01 AM #3
honestly then i would start investing and bond with SSYS and you can be a double structuring economic partners i want to help you , and i know that heavens have shined on 3-d printing , and look at the blessings
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help