Results 1 to 10 of 23
Threaded View
-
08-04-2016, 09:20 PM #4
- Join Date
- Aug 2016
- Posts
- 21
Here is a comparison photo: From left to right, the original model, the turntable mode, and the free scan mode. As you can see, the model has very sharply defined edges, which get a lot softer on the scan. some of the fine detail like thing grooves are almost gone in the turntable auto-scan mode. The free scan is only slightly sharper, but not what it could be.
I think one of the reasons for the lack of sharpness is the fact that the 2 cameras are not focused the same. compounded with the fact that the projector is not focused on the same plane as the cameras, you end up with a "soft" edge, and "blurred" detail.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help