Results 1 to 5 of 5
-
07-28-2016, 08:05 PM #1
- Join Date
- Jan 2016
- Posts
- 326
How to get spare parts for 3D printers?
While taking apart the hotends on my PowerSpec Ultra 3D printer (Flashforge Dreamer clone) to clean a plugged-up metal tube that goes on top of the heating block and goes into the hole in the mounting block, I lost one of the plastic spacers that go between the heatsinks and the fans in front of the servo motors. I thought I have extra parts but I can't find them. How can I get spare parts for my printer? I also replaced the nozzles with new ones because one of the was plugged-up. I found out from the Internet that I have to use a torch to burn out the plastic. I don't have a torch.
-
07-28-2016, 09:37 PM #2
- Join Date
- Jul 2016
- Posts
- 22
I would say get in touch with flashforge and ask them if they can send you the piece you need.
-
07-29-2016, 05:19 AM #3
- Join Date
- Jan 2016
- Posts
- 326
I wish that the screws for securing the metal hotend tubes to the mounting bar are in front instead of in back.
-
07-29-2016, 06:26 AM #4
Torch ?
Nope, totally unnecessary.
why not just heat the nozzle to 250 and poke the crap out with a guitar string ?
Then poke some filament through and pull it out - usually brings the crap out with it, a few pokes and removes should clean it.
-
07-29-2016, 02:52 PM #5
- Join Date
- Jan 2016
- Posts
- 326
I contacted FlashForge about plastic spacers and they told me to contact a hardware store. What kind of plastic filament do I need if I want to print spacers?
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help