Results 1 to 5 of 5
Threaded View
-
07-10-2016, 09:24 AM #4
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
If when switching connectors, the problem stays with the motor ... troubleshoot the motor. If it stays with the driver ... troubleshoot the driver. If it's following the electronics, then you may have a loose connector or a blown driver chip. Check the connectors first. Power supply could also be a problem, but the issue is only on one axis.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help