Results 1 to 10 of 11
Thread: Help with retraction settings
Threaded View
-
06-27-2016, 07:09 PM #4
- Join Date
- Aug 2015
- Posts
- 256
Try printing cooler, if retraction is causing the holes in the print it means it's pulling soft plastic back off the print during the retraction. If you print cooler or add a cooling fan you may be able to prevent this.
Stringing by itself is a sign that you're printing too hot in the first place
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion