Results 71 to 80 of 139
Thread: Open Sourcing the Pegasus
-
04-13-2016, 10:30 AM #71
- Join Date
- Jun 2014
- Posts
- 885
ah, that does complicate things, doesn't it? I'd been seeing that term all this time and never made the proper connection in my alleged mind. Is there a specific value one can assign to a deflection measured in degrees?
-
04-13-2016, 10:33 AM #72
- Join Date
- Jun 2014
- Posts
- 885
ah, that does complicate things, doesn't it? I'd been seeing that term all this time and never made the proper connection in my alleged mind. Is there a specific value one can assign to a deflection measured in degrees? I found this link:
https://www.thorlabs.com/newgrouppag...tgroup_id=3770
that indicates these devices have an output of sorts, but the tech escapes me.
-
04-13-2016, 10:38 AM #73
- Join Date
- Jan 2016
- Posts
- 121
I'll take a look at that later. I have a friend who uses galvos for laser shows, I'll try to talk to him about it. Of course he doesn't need it super accurate, but on theory should be close.
My VAT looks maybe dead. Mighty be good enough to keep playing with, but I accidentally tore the silicon with my last print and have resin on the acrylic VAT. Washed most of it off but not sure if I maybe scratched it or not. Using IPA to clean it then will recoat.
-
04-22-2016, 02:29 PM #74
- Join Date
- Apr 2016
- Posts
- 3
-
04-22-2016, 08:02 PM #75
- Join Date
- Jan 2016
- Posts
- 121
Nah, not recently, have not yet had the chance to re coat my VAT. I've got two things on my To-do list though. I'm still worried my z axis code might lower too much even after calibration.
-
05-02-2016, 08:59 AM #76
- Join Date
- May 2016
- Posts
- 1
thanks so much
-
06-14-2016, 05:19 AM #77
- Join Date
- Jan 2016
- Posts
- 121
Ahhh been so busy, newborns and all Anyway I saw this guy: http://hackaday.com/2016/06/13/open-...m-the-browser/ and I think I'll have to check it out. I'm hoping that in the next month I'll find the time to recoat my vat and start making progress again.
-
06-14-2016, 08:00 AM #78
- Join Date
- Jun 2014
- Posts
- 885
Children and hobbies? How can you manage?
-
07-21-2016, 03:10 PM #79
- Join Date
- Jan 2016
- Posts
- 31
This might help us out here:
http://hackaday.com/2016/07/21/formlabs-form-1-api-now-available-on-github/
-
07-28-2016, 12:11 PM #80
- Join Date
- Jan 2016
- Posts
- 121
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help