Results 1 to 5 of 5
Threaded View
-
05-27-2016, 05:44 PM #2
- Join Date
- Nov 2014
- Posts
- 32
My bad, I had to uncomment #define REPRAP_DISCOUNT_SMART_CONTROLLER and then I realized there were some other necessary settings I'd missed when copying over my old Configuration.h. I'll post an updated version when I get everything working. Currently the motors are going in the opposite direction.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion