End stops won't stop motors from stopping when homing.

[Roxy]

It is very possible that the end stops got fried. Even if the configuration is wrong with regards to whether or not the end stop is inverted, it should still toggle when you press the switch and do a M119. And why does the Z-Min toggle when you press the Y end stop? That suggests you have the wrong board configured or something plugged in the wrong place. That is worth checking out because that is doesn't seem right and resolving that may fix the other end stops.

[rcrocket1]

I have fixed all of my end stops! Now the problem is when i press home, nothing happens. The motors do not move a inch. And double checked to make sure the external power supply is plugged in.