Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
05-22-2016, 05:47 PM #8
- Join Date
- May 2016
- Posts
- 55
Here's my ugly ABS calibration cube. The extrusion temp. was 230°C, the bed was 110°C, the feed rate 60, travel feed rate 100. 100% infill, as a calibration cube should be. My guess is that it might be cooling down too fast.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help