Close



Results 1 to 4 of 4

Thread: Printing thin

  1. #1
    Student
    Join Date
    May 2016
    Location
    Massachusetts
    Posts
    2

    Printing thin

    After a somewhat large print job, my printer is now printing all items thinner. How can I fix this? Thanks!

  2. #2
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,137
    Try to check your hot end for a partial blockage. I usually do this by heating the hotend and then inserting a thin metal wire (from a metallic brush for instance) into the tip (from below). Take precautions.

    It could be due to increased friction on the filament path but improbable.

    OR, would you somehow have modified (by mistake ?) your flow rate parameter ?

    edit : is it the same filament ? If not, is the diameter within acceptable range of the spec ?

  3. #3
    Student
    Join Date
    May 2016
    Location
    Massachusetts
    Posts
    2
    It was with the same filament. I changed it to another one, and it seemed to work just fine now.

    Quote Originally Posted by LambdaFF View Post
    Try to check your hot end for a partial blockage. I usually do this by heating the hotend and then inserting a thin metal wire (from a metallic brush for instance) into the tip (from below). Take precautions.

    It could be due to increased friction on the filament path but improbable.

    OR, would you somehow have modified (by mistake ?) your flow rate parameter ?

    edit : is it the same filament ? If not, is the diameter within acceptable range of the spec ?

  4. #4
    Quote Originally Posted by scorpionoil View Post
    After a somewhat large print job, my printer is now printing all items thinner. How can I fix this? Thanks!
    settings option??????????

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •